Good Quality Bakelite Insulation Board is an early plastic material & thermosetting phenol formaldehyde resin, formed from a condensation reaction of phenol with form aldehyde. Orange Red Bakelite Insulation Board is a hard dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with phenolic resin, Bakelite phenolic sheet is produced in dozens of commercial grades and with various additives to meet diverse mechanical, electrical and thermal requirements, there are Don`t anti-static and Anti-static (ESD) of the Bakelite sheets, please kindly pay attention to this when you order.
Produced from a woven cloth which is thoroughly impregnated with a phenolic resin and cured,High Quality Bakelite 4ftx8ft Insulation Panel is a physically strong material which offers excellent mechanical strength and machinability.
Electrical Insulating Bakelite Sheet is made of phenolic resin and fabric paper.This product has higher mechanical property,water and heat resistance,more stable dielectric property after soaking. Specification:The thermal temperature is 150 ℃.The thickness is from 0.8-55mm,55mm and longer.The color is orange red and black.The density is 1.30-1.45g/cm³.The width is 1020mm,the length is 2040mm. Application:Electrical Insulating Bakelite is used as insulating structural parts for electric machines,apparatus equipment and oil transformer.
For Gasket Phenolic Black 1/4 Bakelite Sheet is a generic named material based on the thermosetting phenol formaldehyde resin.1/4 Inch Black Bakelite Sheet was the first plastic made from synthetic polymers.Insulation Black Bakelite Sheet was used for its nonconductive and heat-resistant properties in radio and telephone casings and electrical insulators. The retro appeal of old Black Bakelite Sheet products, especially kitchenware and toys, has made them quite collectible in recent years. Black Bakelite Sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with synthetic resin. These layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics or unwoven fabrics. When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated plastic.
High Temperature Resistance Bakelite Hylam Sheets is the combination of hard and high density material and impregnated paper using phenolic resin or fiber glass cloth and pressed under heat and pressure. This industrial laminate normally consists of fiber paper, cotton fabric, chemical fiber yarn and fiber glass, etc. When specific heat and pressure are applied to these layers, a chemical reaction combines the layers into a high-pressure thermosetting plastic.